Back to top
08045803158
Send SMS Send Inquiry

Flow Elements

Our company provides a wide range of Flow Elements such as orifice plate, orifice integral assembly, orifice plate assembly, ventury tube, etc. They are designed using high-grade raw materials to ensure maximum sturdiness and durability. These products are available in precise dimensions and sizes to meet the exact demands of the clients. They are ideal to be used in high temperature and pressure applications. In addition to this, these Flow Elements are recommended to be used with liquids, gases as well as low velocity steam flows.

Venturi Tube

Electronet series Venturi is the second most common differential pressure primary element. It is based on proven technology. It has no moving parts and is suitable for high temperature and pressure applications. Venturi tubes offer advantages including an extremely low pressure loss, a higher durability and a lower chance of catching a sludge media and sediment than other throttle elements. The Venturi tube is mostly used for measurements of flow wherever a minimal loss of pressure is important. The major advantage of the Venturi over orifice plates and flow nozzles is in the area of pressure recovery. Typically unrecovered pressure is in the region of 10 - 30% of measured DP as opposed to 40 - 90% for an orifice plate (depending onbeta ratio).

Specification 

 

  • Brand: ELECTRONET
  • Model: VENTURY TUBE
  • Line Size: 100 - 600 NB
  • Type: Cast Convergent Section
  • Accuracy: +/- 0.7 %
  • Design: As per BS EN ISO 5167 

 

AFM TX-22 - DP Flow Meter

Electronet Series AFM TX-22 is a DP Flow Meter suitable for flow measurement of compressed air. It is integrally mounted with the inbuilt flow transmitter. It is compact and complete flow meter to measure the flow rate of compressed air. The flow meter works on differential pressure flow measurement principle. It includes LCD display for Pressure, Flow Rate and Totalized value with engineering units. Flow meter is available with Socket Weld, Threaded and Flanged end connections.

AFG 20 - Air Flow Gauge

Electronet series AFG-20 is Digital Air Flow Gauge for fast, easy & trouble free operation. The flow gauge works on differential pressure flow measurement principle. These can be cost effective & ideal for monitoring the flow rate of compressed air. Display shut-off facility is provided so that display can be made ON only if required through push button. Thus it saves the battery power and results in long lasting battery operation.

Orifice Plate

Electronet series orifice plate is the most common differential pressure primary flow element. It is based on proven technology. It has no moving parts and is suitable for high temperature and pressure applications. Orifice plates are recommended for clean liquids, gases and low velocity steam flows. Flow measurement using orifice plates requires the accurate location of up stream and downstream pressure tapping. Various types of orifice carrier assemblies are available to suit a wide range of applications.

Specification 

 

  • Brand: ELECTRONET
  • Material: AISI 316, AISI 304, Hastalloy C, Monel, Other as per requirement
  • Line Size: 15 NB to 1000 NB (1/2 inch to 40 inch)
  • Accuracy: +/-1% of F. S.
  • Usage: Industry 

 

Orifice Integral Assembly

Electronet series Integral orifice plate assembly is integrally mounted with the measuring instrument. It is compact and complete flow meter device without need of impulse piping. The assembly includes integral orifice plate, bodies, stud, nut & gasket bodies with socket weld or threaded end connections are available IOPA with upstream & downstream piping with flanged ends are also available.

Specification 

 

  • Brand: ELECTRONET
  • Line Size: 15 NB to 50 NB (1/2 inch to 2 inch NB)
  • Accuracy: +/- 2% of F.S.
  • Material of Plate: AISI 316, AISI 304, Hastalloy C, Monel, Other as per requirement
  • Material of Body: A351-CF8M, A216-WCB, A105, A182-F316
  • Material of Gasket: P.T.F.E. 

 

Orifice Plate Assembly

Electronet series Orifice flanges are intended for use instead of standard pipe flanges when an orifice plate or flow nozzle must be installed. Pairs of pressure tapping are machined into the orifice flange, making separate orifice carriers or tapping in the pipe wall unnecessary. The range of orifice flanges covers all standard sizes and ranges, and all common flange materials. Flanges are available in socket weld or weld neck form, and are typically supplied with two and half NPT tapping in each flange. Jacking screws to ensure ease of removal of the primary flow element are provided. Orifice flanges are supplied complete with bolting and gasket kits.

Specification 

 

  • Brand: Electronet
  • Line Size: 15 Nb To 1000 Nb (1/2 Inch To 40 Inch)
  • Accuracy: +/-1% Of F. S.
  • Material Of Gasket: Caf, Swg, Ptfe & Other As Per Requirement
  • Material Of Flange: A105, A 182-F316, A 182-F304, A 182-F11, A 182-F22 & Other As Per Requirement
  • Model: Orifice Plate Assembly 

 

X